THX :

Check the alarms, Stop and Relaunch the mission of your Thermo Buttons and Hygro Buttons

• Check the alarm events of your Thermo and Hygro Buttons (Compatible with all types of Buttons :21G, 22L, 22T, Hygro 23)
• Stop the mission in progress
• Relaunch the mission

1. Check the alarms :

• Green double flash for a mission in progress, without alarm events
• Red double flash for a mission in progress, with alarm events
• Green simple flash for a mission stopped, without alarm events
• Red double flash for a mission stopped, with alarm events

An audible alarm sounds to indicate also the presence of alarms.

As for Hygro Buttons, the alarm can be that for temperature or for humidity.

You can let the Button permanently on the reader. The alarm checking is made every 10 minutes automatically with a status indication made by the LED and by an audible signal in case of alarm.

The user can refresh the alarms by pressing central button.

2. Stop the mission :

To stop a running mission, the central button should be pressed and held for over 4 seconds.

The right lights up in red, then the left led lights in red and flashes 3 times. A triple beep sounds. The missio, is stopped. The data are maintained in the Button. The left led flashes once regularly to indicate that the mission is stopped.

- Green: no alarm events ocurred

- Red: some alarm events ocurred. A regular beep sounds

3. Relaunch the mission :

To relaunch a running mission, the central button has to be pressed and held for over 4 seconds. The right led lights once in red, then the left led lights in green and flashes 3 times. A triple beep sounds. The mission is relaunched with the same parameters as before. The left led flashes regularly twice to indicate that the mission is in progress.

- Green: no alarm events ocurred

- Red: some alarm events ocurred. A regular beep sounds