 TC VERIFIER :
Check the alarms and stop your Thermo Buttons without PC
- Checks temperature alarm events
- Green Led : "no alarm events have ocurred"
- Red Led : "some alarm events have ocurred"
- Enables to stop the Thermo Button mission
- Avoids the use of PC
- Maintains the data registered in the Button memory
- Lithium battery life span : 5 years
- Dimensions : 4 x 6 x 2 cm / Weight 25 gr
Works with Thermo Buttons 21G only
TC Verifier is the ideal tool for cold chain control. A simple contact with the Thermo Button enables to check if the temperature record contains alarms.
Functionning :
1. Check alarm events :
Place the Thermo Button on the reader during 3 seconds
- If the Green LED is turned on, it means no alarm events have occured during the mission.
- If the red LED is turned on, it means that alarms events have occured.
The data stored in the Thermo Button memory are maintained.
If the upper LED flashed 10 times, there is no mission in progress.
2. Stop the mission :
Place the Thermo Button on the reader during 3 seconds to check the alarms
Hold during 5 additional seconds. The upper LED will flash 10 times to indicate that the mission in progress has been stopped.
The data stored in the Thermo Button memory are maintained.
TC-Relaunch works with a 3-Volt lithium battery (life span 200 000 verifications or 5 years). User replaceable battery.
Storage and operating temperature : -20 et + 54 °C, Humidity : 5% à 95%.
|
|
Accesories 
