French (Fr)English (United Kingdom)Español(Spanish Formal International)

Temperature Data loggers

Temperature Probes on Ethernet

Thermo Button Programs

Web Applications

Radio frequency solutions

Home Proges Accesories TC Relaunch
PDF Print E-mail

TC relaunch checks the alarms, stop and relaunch the mission of your Thermo Buttons dataloggersTC-RE-LAUNCH

3 functions Controler for Thermo Buttons. Checks the alarms, Stop the mission, Relaunch the mission

  • Checks temperature alarms
    • Green Led : "No alarm event have ocurred"
    • red Led : "Some alarms events have ocured"
  • Stops a mision in progress
  • Relaunches a new mission with the same parameters as the previous mission
  • Avoids the use of PC
  • Life span of the lithium battery : 5 years
  • Dimensions : 4 x 6 x 2 cm / Weight 25 gr

Works with Thermo buttons 21G only

 

Functionning :

1. Check temperature alarms :

  • Place the Thermo Button on the reader during 3 seconds
    • If the Green LED is turned on, it means no alarm events have occured during the mission.
    • If the red LED is turned on, it means that alarms events have occured.
  • The data stored in the Thermo Button memory are maintained.
  • If the upper LED flashed 10 times, there is no mission in progress.

2. Stop the mision :

  • Place the Thermo Button on the reader during 3 seconds to check the alarms
  • Hold during 5 additional seconds. The upper LED will flash 10 times to indicate that the mission in progress has been stopped.
  • The data stored in the Thermo Button memory are maintained.

3. Relaunch the mission :

  • Use a Thermo Button whose mission has been stopped. The upper LED flashes 10 times.
  • Hold the Thermo Button during 3 seconds.
  • The succesful relaunch will be indicated by both red and green LEDs on for 2 seconds. The Thermo Button is relaunched from the previous mission parameters. The mission starts immediately. The previous mission data are deleted. If the relaucnh attempt fails (both LADs not on for 2 seconds) simply retouch the target Thermo Button before touching any other Thermo Button. Touching another Thermo Button will cause the previous mission parametrs to be lost.

TC-Relaunch works with a 3-Volt lithium battery (life span 200 000 verifications or 5 years). User replaceable battery.
Storage and operating temperature : -20 et + 54 °C, Humidity : 5% à 95%.
You cannot relaucnh a Thermo Button that has been stopped with Thermo Track PC software.