USB reader for Thermo et Hygro Button
The USB reader for Thermo Button and Hygro Button connects to the USB port of your PC
It can programm and read our temperature data loggers.
Just plug the logger on the blue dot.
|
|
TB NET CONNECT
Use your Thermo Buttons remotely, without PC and without software.
-
Read, stop and relaunch your Thermo Buttons without PC
-
Control the alarm on goods delivery
-
Plug a Thermo Button or an Hygro Button on the reader : In less than 10 seconds :
- The data are transferred and archived on Thermotrack Online or on Thermotrack Webserve
- The green and red LEDs indicate if the alarm thresholds have been exceeded
- The Button goes on registering the temperatures, is stopped or relaunched depending the the options you choose in the TB Net Connect
No need of PC, software or drivers to download. You juts need 5 minutes to install the TB Net Connect on your network.
TB Net Connect Features
- Compatible with all Thermo and Hygro Buttons
- 6 leds indicate the data download, the high and low alarms, the full memory
- 1 Ethernet port
- 1 RJ12 port for the Thermo Button reader
- DHCP or fixed IP-Address
- Power supply 230/9 volts provided
- ABS Casing
- Dimensions 14 x 8.4 x 3.5 mm
|
|
|
|
|
|
Readers
